The machine Description Features Related machines Accessories Video Request info
Continuous stretching machine/compact Mod. UNICA 600 -
Above data and pictures are for reference only and may be modified without prior notice
Code UNICA 600
Production type Fiordilatte and similar products, Kashkaval, Mozzarella, Pizza cheese / Pizza mozzarella, Stick cheese,
Company sector Agricultural farm / Craft workshop
Restaurant / Take away / Great Organized Retail
Start-up
Production capacity Max 600 kg/h
The production capacity is related to the characteristics of the desired final product
Scheda in PDF unica.pdf
Continuous stretching machine/compact Mod. UNICA 600 -
Above data and pictures are for reference only and may be modified without prior notice

UNICA 600, like all “COMPACT” machine was born to summarize the 4 most important phases of the paste filate working process, like:
-cut the raw material;
-stretching of the curd;
-production of the hot water necessary to stretching 
-final moulding of the product.
Infact the machine allows the user to facilitate the work without the use of multiple machines for every working cycle.
The most important part of the machine can be briefly described and divided into:
CURD-CUTTER
Is made in stainless steel mounted on the machine at a comfortable high to put in the curd blocks to work, inside is located a disk with blades made in stainless steel that will proceed to cut of the curd, that will fall to the augers compartment.
AUGERS COMPARTMENT
Made in stainless steel at double room, where the augers of pre-stretching and the advancement of the product are housed, to the final paste compartment. During the pass into the cooking compartment, the curd is to be hit by a jet of hot water coming out of faucets, allowing its soaking. 
HOT WATER HEATER
The hot water necessary to stretching is produced through the hot water heater incorporated into the machine, made entirely in stainless steel with operation of steam. The temperature of hot water is easily adjustable with the thermo-regulator installed on the control panel.  The water supply to the mixing zone is done by electro pump installed on the machine.
DIPPING ARMS COMPARTMENT
Have a containment capacity of about 30 kg where stay the dipping arms through which you can give to the paste the desired consistency. In this section is even possible to correct the humidity degree, if it is necessary, through the immission on the paste, of the stretching water, with adjustable flow. The paste, arrived at the right stage of stretching, escapes from the machines, through a discharge outlet to arrive to the moulding compartment.
MOULDING COMPARTMENT
With double heated room, that forming a single body with the stretching section.
ELECTRIC PANEL
Mounted on the structure of the compact machine, made in stainless steel watertight IP565, with low voltage controls.
SANITATION AND MATERIAL
The machine is manufactured by responding to the latest international sanitary regulations, both in materials and construction, so that every part is easily accessible to allow the user easy and quick cleaning.
Continuous stretching machine/compact Mod. UNICA 600 -
Above data and pictures are for reference only and may be modified without prior notice
Length IT 2600 mm | USA/UK 7,8 ft
Width/Depth IT 1350 mm | USA/UK 4,05 ft
Height IT 2200 mm | USA/UK 6,6 ft
Electric power 6 Kw
Voltage 380V - 50Hz
CIP NO (optional)
 
Production features
Can be achieved thanks to its versatility, a variety of spherical products (mozzarella, scamorze, provole, that with or without heads, ovoline, etc), with variable weight. The machine, in addition, allows to the user, through the application of a particular insert, which will be installed to replace the moulding drum, to get braids with different diameter and length, which are to be set by the user. The pasta filata introduced into the hopper is pushed to the inlet through the action of the auger variable speed and then finds itself in the final section of the moulding where is housed a moulding drum that turns continuously, consists of holes with different diameter and shape, depending on the production requirements. One the most important characteristics of this machine, is that you can mount an alternative a mould for silani, therefore using it only and exclusively for parallelepiped products. This mould (optional), is made entirely in stainless steel mounted on wheels for easy moving, and is extremely easy to position and secure it to the moulding body of the entire compact machine.
Specifications
The materials used in the construction are only in stainless steel AISI 304, with Teflon coverage for those parts that are in contact with the material processing (cutting-cooking-stretching).
The machine is made according to EEC regulations in force.
Continuous stretching machine/compact Mod. UNICA 600 -
Above data and pictures are for reference only and may be modified without prior notice
Continuous stretching machine/compact Mod. UNICA 600 -
Above data and pictures are for reference only and may be modified without prior notice
Continuous stretching machine/compact Mod. UNICA 600 -
Above data and pictures are for reference only and may be modified without prior notice
Continuous stretching machine/compact Mod. UNICA 600 -
Above data and pictures are for reference only and may be modified without prior notice
Company name *
City *
Phone *
VAT Number *
Province *
E-Mail *
Question
Completing this form authorises customer information to be used in compliance with the Italian Legislative Decree D.Lgs 196/03
I ACCEPT I DO NOT ACCEPT